Two lines, the same job: squat, press, Olympic lifts and pull-ups in one place, with plates and bars stored in the frame itself. HD Elite iD is the top of the range and is configured down to the last detail; HD Athletic NX delivers Hammer Strength quality at a scale that suits the space and the budget. Alongside them come the Bridge, which joins racks with an overhead span, rigs for a whole zone, and cable stations and storage. Click a card to open a larger image and the details.
Each line has a half rack, a power rack and combo versions for two stations. The difference is in the construction, the load rating and how much can be chosen.
The Bridge joins Elite iD racks with a span and opens up overhead training space. A rig links several lifting stations into one frame and is configured to fit the room. Cable stations and the accessory tower are added to a rack or a rig, so the strength zone gains cables and storage without new machines.
The Bridge is a span that joins racks and turns the space between them into a training zone: monkey bars, pull-ups and suspension straps hang from the bridge, and the floor stays clear. The monkey bars can be set in a higher or lower position.
Olympic lifts at the rack stations, inside the Bridge. Allow 244 × 305 cm per station.
Body weight training on straps, on the outer side of the bridge. Bridge length × 213 cm.
The same strap training in the space under the bridge, between the racks. Bridge length × 213 cm.
For racks used with the Bridge a height of 244 cm is recommended; 274 cm makes sense in sports halls where the athletes' height calls for it. The monkey bars and ARC bar for the Bridge are dedicated parts and cannot be swapped for those from the racks, and the custom sign for the Bridge is larger than the signs for racks.
The station attaches to a storage upright, on the rear side of the rack: barbell at the front, cables or storage at the back. It fits every Elite iD and NX rack, and the 15 cm connectors and diagonal brace come with the station. Pull-ups are then not possible on that side.
The station stands between two connectors, flush with the front of the racks. The gap between racks is from 2.4 to 6.7 m, so there is plenty of room to train.
One or two stations, back to back, on the face of a connector between racks. Only one connector is needed, 2.4 to 3.4 m long, which makes this the most space-efficient option.
The Pulldown / Row can also stand alone. Two cable columns on a shared core form a Dual Adjustable Pulley, 107 or 183 cm wide, with pull-up bars and up to four shelves.
All rigs are anchored to the floor. Stations 274 cm high go only with Elite iD racks of that height, on a connector or between racks. When cable stations are mounted on a rig, at least 2.4 m is needed between lifting stations. Against a wall, in a row, the same elements are configured as HD Perimeter →
The figures refer to the standard half racks of both lines, as supplied without further configuration.
| HD Elite iDELT-HR-STRD | HD Athletic NXHDW-HR-STRD | |
|---|---|---|
| Who it is for | Elite sport and gyms that ask the most of a rack, from smaller spaces to large training centres. | Schools, clubs and training centres that want Hammer Strength quality at a scale that fits their space and budget. |
| Working uprights | 102 × 76 mm, 7-gauge steel — a wall 50% thicker than 11-gauge. | 76 × 76 mm, 11-gauge steel. |
| Crossmembers | 76 × 76 mm, 11-gauge steel. | 51 × 76 mm, 11-gauge steel. |
| Upright height | Two heights: 244 and 274 cm. The standard version is 244 cm; 274 cm is for athletes taller than 193 cm. | Three heights: 218, 231 and 244 cm. The standard version is 231 cm, premium 244 cm; the two lower ones fit under a 244 cm ceiling. |
| Maximum load | 380 kg | 185 kg, 225 kg in the premium version |
| Storage depth | 54 cm; 38 cm also available to order. | 54 cm; 38 cm also available to order. |
| Weight without accessories | 240 kg | 174 kg |
| Pull-ups | Three grips. | Two grips. |
| Plate horns | Three pairs of standard and two pairs of XL. | Five pairs of standard. |
| Dock N’ Lock | Included. | Ordered separately. |
| Floor anchoring | Not required. | Not required. |
| Colours | Three zones, each in its own colour: uprights, crossmembers, and bar supports and safeties. | Uprights in standard or optional colours; crossmembers and bar supports in High Wear Charcoal. |
Both lines are part of the Hammer Strength HD system, whose products are tested and certified beyond current EN and ASTM standards. The working uprights have laser-cut position numbers that cannot wear off.
The standard versions come ready-made. Everything else is configured to suit the space, the sport and the number of people training at once — we do that together, over the floor plan.
Upright height is chosen to suit the ceiling and the height of the athletes. Storage depth is 38 cm, when space is tight, or 54 cm, when more room is needed for a bench and a spotter.
From a plain bar to multi-grip versions: Monkey Bar, Offset Bar and 2-Handle on NX; 3-Handle, Rotating Chin, Straight Bar, Wing and the 3×3 crossmember with Arc Bar, neutral or ball grips on Elite iD.
Standard or premium bar supports, and safeties: standard, premium or flexible, in reinforced nylon, which protect the knurling of the bar and dampen noise.
A standard horn takes four 20 kg Olympic plates or up to three bumper plates; an XL horn takes six Olympic or up to five bumper plates. Bar holders, shelves and the Bull Horn for small plates complete the set.
Lightning Arms, Power Pivot, Nordic Ham, Dip Handle, Battle Rope Anchor, Utility Band Pegs, Wall Ball Target, Heavy Bag Hanger.
Dock N’ Lock fixes the bench into the rack, always in the same position. Adjustable benches for the racks come with or without Dock N’ Lock.
The rear crossmember can carry the Hammer Strength sign or the club's own, and colours are chosen for each part of the rack — colours for racks →
Hammer Strength platforms fit both lines. When a rack has to go against a wall, with cable columns and storage in a row, the answer is HD Perimeter →
About the images: the racks are shown with plates and bars for scale; plates, bars and benches are ordered separately. Most are shown in black or charcoal, the NX combo with red uprights.
